Congratulations – you have made your first purchase of the Inflatable PeeCock, and definitely next on your list is to learn how to take care and use your prized possession. Here is a quick guide on how to perform maintenance so that you can enjoy your PeeCock product for longer.

How to Use

Transition from Flaccid to Rigid: Pumping Process:

1) Cover the air intake hole at the back of the pump with your hand or finger.
2) Squeeze the pump on the right side of the scrotum to pump air into the airshaft.
3) Ensure the air intake hole remains covered during pumping to prevent air from escaping.
4) After each squeeze, release the hole to allow the pump to refill with air.
5) Typically, around 8 pumps are required. Do not over-pump air into the airshaft to avoid shortening its lifespan.
6) Pump in just enough air to achieve the desired erection.

Shaping the Erection: Length:

1) While pumping, ensure that the lubricated skin extends evenly along with the inflated airshaft.
2) After pumping, pull the PeeCock skin shaft forward to position the airshaft entirely within the skin shaft space, rather than inside the scrotum sag.
3) Remove excessive air under the skin by gently pinching the tiny lube/air regulation hole (at the base of the U tab) to open the airway and allow air to flow out.
4) The base of the airshaft should be set low and push out at the base of the PeeCock U tab.

Glans Head:

1) Shape the skin around the ridge of the glans head to accommodate the inflated airshaft into place.
2) Expel any trapped air under the skin through the air valve by gently pinching the tiny lube/air regulation hole to open the airway and release the air.
3) The skin should fit snugly on the inflated airshaft.

Transition from Rigid to Flaccid:

1) To release the erection, press and hold the release valve on the left side of the scrotum. The airshaft immediately returns to the original deflated state, and the PeeCock transitions to a flaccid state.
2) Retain the air under the skin by gently pinching the tiny lube/air regulation hole to open the airway and allow air to flow in.
3) The skin should inflate back to its original form.

Maintenance: Lubricating the Inflatable PeeCock:

1) To maintain the shelf life, comfort, and realistic feel, lubricate the internal components of the Inflatable PeeCock.
2) The Inflatable PeeCock contains a small amount of coconut oil for internal lubrication.
3) When the lubrication diminishes, apply a small amount of pure 100% coconut oil into the PeeCock through the lube/air regulation hole.
4) Hold the PeeCock with the shaft pointing downwards. Use a syringe (without a needle) and inject about 3 ml of coconut oil into the PeeCock shaft and spread the oil evenly along the shaft by rubbing the silicone skin against the inner air shaft.
5) Avoid using other oils as they may cause damage to the internal components.
6) Ensure the coconut oil is in a liquid state for easy application and consistency.
7) Use only the specified amount of oil to prevent leakage from the PeeCock.

Cleaning and Care:

1) Before you wash the PeeCock, cover the air intake hole with the stopper (provided with every purchase of the PeeCock) to prevent water entering through the hole.
2) Clean the Inflatable PeeCock using mild antibacterial soap and clean water every day or after every use, treating it as you would wash your body.
3) Clean gently, avoiding harsh scrubbing, and pay attention to folds and crevices.

Condoms and Lubricants:

1) The use of a condom is required for your safety and that of your partner. It also helps reduce the risk of sexually transmitted diseases and keeps the Inflatable PeeCock clean and in good condition.
2) Use only condoms that contain water-based lubricant. Silicone lubricants will damage the PeeCock.
3) The silicone used to make the Inflatable PeeCock is phthalate-free, non-toxic, and safe for skin contact, but it is not recommended for sexual penetration without the use of a condom.
4) If you are using the Inflatable PeeCock for penetration, the use of a condom is required for your safety and that of your partner.

Attachment: Harness (Pack Harness – NEW!)

1) Insert the bottom loop through the horizontal opening on the FLY Clip.
2) Secure it by placing the plastic pin through the loop.
3) Attach the FLY clip onto the U tab of the Inflatable PeeCock.
4) Thread one end of the transparent elastic strap through the top right ear loop of the FLY Clip and into the top left ear loop.
5) Secure the loose end of the transparent elastic strap into the metal ring that holds the black elastic waistband.
6) Adjust the position of the Inflatable PeeCock to rest at your pubic region.

Attachment: Harness (Clip Harness – NEW!)

1) Slide the bottom loop of the nylon strap through the horizontal opening on the FLY Clip and secure it with the plastic pin.
2) Thread both ends of the front nylon strap through the left and right vertical openings on the FLY Clip respectively.
3) Attach the FLY clip onto the U tab of the Inflatable PeeCock.
4) Fasten both ends of the nylon strap to the back waist nylon strap using the convenient clip and lock system on the left and right end.
5) Wear the harness like regular underwear and adjust the PeeCock to rest comfortably at your pubic region.

Attachment: Harness (Comfort, Play, Jock, Brief, Boxer & Button Fly Boxer)

1) Put the Inflatable PeeCock shaft through the O ring of the harness.
2) For Comfort and Play Harness – Wear the harness like how you would wear any underwear.
3) For Jock, Brief, Boxer & Button Fly Boxer – Place the scrotum of the PeeCock into the pouch.
4) Wear the harness like how you would wear any underwear.
5) Adjust the position of the PeeCock to rest at your pubic region.

Attachment: Velcro

1) Paste the hook side of the Velcro tape onto the FLY clip. Press and hold for 10 sec. Attach the FLY clip onto the U tab of the Inflatable PeeCock.
2) Shave the pubic hair around your pubic region where the Inflatable PeeCock will be attached.
3) Paste the clear waterproof adhesive tape onto the shaved pubic region. Press and hold for 10 sec.
4) Paste the loop side of the Velcro tape onto the clear adhesive tape at your pubic region. Press and hold for 10 sec.
5) Attach the Inflatable PeeCock onto the Velcro tape at your pubic region.

Attachment: Medical adhesive

1) Attach the FLY clip onto the U tab of the Inflatable PeeCock.
2) Shave the pubic hair around your pubic region where the Inflatable PeeCock will be attached.
3) Apply a thin layer of adhesive to cleaned, dry skin using a cotton swab. Wait about 20-30 seconds until the adhesive turns clear and tacky. Repeat this process with a second layer.
4) Once the second layer is dry, position the PeeCock in the correct position and hold it firmly for 10 seconds.

To ensure optimal usage and care for the Inflatable PeeCock, we'd like to highlight the following usage guidelines:

1) Avoid over-pumping the air shaft to prevent overstretching and potential breakage of the air guide sleeve. We recommend using 8 full pumps to achieve the optimal inflation for your Inflatable PeeCock. It's important to maintain a slight 'air space' inside the air shaft to allow for movement and ensure comfortable usage. This guideline helps in achieving the ideal inflation level, optimizing your PeeCock's performance.
2) Refrain from packing the PeeCock with the air shaft partially inflated or not fully deflated to prevent excessive pressure on the air guide sleeve.
3) Exercise caution during use, avoiding extreme or rough sex play that might strain or stress the air shaft.
4) Handle the Inflatable PeeCock with care, keeping it away from sharp objects or any elements that could puncture the air shaft, disrupting its functionality.
5) We highly recommend against prolonged submersion of the Inflatable PeeCock in water, particularly in a hot tub. Introducing hot water into the pumping mechanism and air valve may lead to potential damage to the inflation system. The heightened temperature of the water can generate pressure within the air tube, possibly resulting in damage to the air guide sleeve. Furthermore, the air valve system is susceptible to potential damage under these circumstances.

It's essential to emphasize that we cannot be held responsible for damage resulting from misuse or improper use of the product.

Should you have any particular usage or maintenance question on your PeeCock purchase, feel free to get in touch with us today. We are more than happy to provide further guidance.